Specialized Fast Trak LK Sport tires use a reduced knob height for lower rolling resistance
8-speed XC crankset uses Shimano's Octalink-splined BB interface for reliable power transfer
Avid BB5 mechanical disc brakes with 160mm G2 Clean Sweep rotors for controlled stopping power
Fully butted A1 Premium Aluminum frame with double ORE down tube makes for a lighter weight, more compliant and longer lasting bike
80/100mm-travel fork with hydraulic damping features preload adjust and size-specific spring rates for smooth, customized performance
FRAME
Specialized A1 Premium Aluminum, fully butted, formed TT, Double ORE DT, externally relieved HT, reinforced disc mount, forged dropouts w/ replaceable hanger, disc only
HEADSET
1-1/8"" threadless, loose ball
SEAT BINDER
Alloy QR, nylon washer
FORK
SR Suntour SF9-XCR-LO, 80mm, 1 piece magnesium lower, alloy steerer, hydraulic damping w/ LO and preload adj., size-specific spring rates, spring assisted seal
FRONT TIRE
Specialized Fast Trak LK Sport, 26x2.0"", 60TPI, wire bead
REAR TIRE
Specialized Fast Trak LK Sport, 26x2.0"", 60TPI, wire bead
INNER TUBES
Schraeder valve
RIMS
Alex RHD, 26"", pinned, alloy double wall w/ eyelet, 32h
FRONT HUB
Forged alloy, hi/low flange, double sealed, ground race, machined disc mount, 32h
REAR HUB
Forged alloy, double sealed, ground race, machined disc mount, cassette, 32h
SPOKES
2mm (14g) stainless
FRONT DERAILLEUR
Shimano Altus, 34.9mm clamp
REAR DERAILLEUR
SRAM X-5, mid cage
SHIFT LEVERS
SRAM X4-R trigger
CASSETTE
SRAM PG-830, 8-speed, 11-32t
CHAIN
KMC X8 w/ reuseable Missing Link
CRANKSET
SR SunTour, Octalink spline
CHAINRINGS
42S x 32S x 22S replaceable
BOTTOM BRACKET
Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm
STEM
3D forged alloy, 10 degree rise, 25.4mm clamp
HANDLEBARS
Alloy riserbar, 25mm rise, 640mm wide, 8 degree back sweep, 7 degree up sweep
GRIPS
Specialized Enduro, dual compound Kraton, no flange, 131mm
SADDLE
Specialized XC, Body Geometry, 143mm width, front and rear bumpers
SEATPOST
Alloy two bolt, 12.5mm offset, micro adjust, 30.9mm
FRONT BRAKE
Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor
REAR BRAKE
Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor
BRAKE LEVERS
Avid FR-5, alloy, two-finger linear pull
PEDALS
Alloy body and cage, 9/16""
* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.
13 | 15 | 17 | 19 | 21 | 23 | |
---|---|---|---|---|---|---|
Bottom Bracket Height - Low Setting | 299mm | 299mm | 299mm | 299mm | 299mm | 299mm |
Top Tube Length (Horizontal) | 540mm | 555mm | 580mm | 605mm | 630mm | 655mm |
Head Tube Height | 100mm | 100mm | 120mm | 120mm | 140mm | 160mm |
Head Tube Angle - Low Setting | 70.25° | 70.25° | 70.25° | 70.25° | 70.25° | 70.25° |
Seat Tube Angle (Actual) - Low Setting | 73° | 73° | 73° | 73° | 73° | 73° |
Top Tube Length (Actual) | 534mm | 538mm | 557mm | 581mm | 608mm | 638mm |
Seat Tube Length - Center to Top | 330mm | 381mm | 432mm | 483mm | 533mm | 584mm |
Wheel Base | 1017mm | 1032mm | 1058mm | 1083mm | 1109mm | 1135mm |
Standover Height | 696mm | 727mm | 766mm | 794mm | 830mm | 865mm |
Chainstay Length | 424mm | 424mm | 424mm | 424mm | 424mm | 424mm |
Crank Length | 170mm | 170mm | 170mm | 175mm | 175mm | 175mm |
Handlebar Width | 640mm | 640mm | 640mm | 640mm | 640mm | 640mm |
Stem Length | 60mm | 60mm | 75mm | 75mm | 90mm | 90mm |
Seatpost Length | 350mm | 350mm | 350mm | 400mm | 400mm | 400mm |
For safety warning please refer to the documentation in the Manual Downloads section of this page.
0 Reviews