2010 SX Trail II
0 Bewertungen
Noch immer ist es das erfolgreichste Slopestyle-Bike der Welt. Im Wettkampf ist es…
Farbe:
Black Ano
Was ist meine Größe?
Wähle eine Grösse
Produktdetails
Noch immer ist es das erfolgreichste Slopestyle-Bike der Welt. Im Wettkampf ist es das Lieblings-Bike von Darren Berrecloth - und auf ihm konnte Sam Hill seinen ersten Dual Slalom-Titel beim Sea Otter Classic gewinnen. Der innovative Hinterbau, der niedrige Schwerpunkt, besseres Schluckvermögen bei harten Schlägen und der ultra-stabile Rahmen machen das SX Trail zu Deinem zuverlässigstem Begleiter, wenn es über Drops und andere Stunts geht oder was auch immer Dir als nächstes vorschwebt.
FSA Gravity Light Crank, with Gamut shiftguide
SX Trail 170mm travel M5 Premium Aluminum frame with ORE tubing and full cartridge bearing pivots redefines the freeride
Avid Code CR Mag 4-piston hydraulic brakes offer precision modulation and power, along with adjustable lever reach and pad contact for confidence in the cockpit: 203mm front, 185mm rear rotors
Specialized Clutch 26 x 2.3" front tire with SX dual-ply casing supplies speed, traction and control, and the Chunder SX 2.3" rear tire provides cornering stability while staving off pinch-flats
Venerable Fox 36 Van RC2 fork with adjustable high- and low-speed compression in the FIT cartridge keeps brake dive and square-edge bumps at bay, the 20mm thru-axle precisely guides your rock garden quest
30mm-wide custom DT Swiss F550 rims excel in rocky downhill runs and hard landings, the Hi Lo disc front hub with 20mm thru-axle is paired with a thru-axle 10mm Cr-Mo rear hub with sealed cartridge bearings for the best combination of strength and weight
New for 2010 Fox DHX RC4 rear shock increases shaft diameter for lower internal pressure, provides an elegant mix of granular adjustability with its externally adjustable high- and low-speed compression, and re-engineered Boost Valve enhances small bump compliance and large bump mastery
Technische Spezifikationen
FRAMESET
FRAME
SX Trail M5 Premium Aluminum frame, ORE TT/DT, forged HT, full cartridge bearing pivots and shock yoke, ISCG mount, replaceable derailleur hanger, derailleur guard, 170mm travel
HEADSET
1-1/8"" cartridge alloy upper and 1.5"" lower cartridge bearing
SEAT BINDER
7050 hard annodized alloy collar w/ QR, 34.9mm clamp ID, black
SUSPENSION
REAR SHOCK
Specialized DHX RC4 coil 7.875x2.25"" for SX Trail, rebound adj., High and low speed compression adj. and bottom out control, S:500, M:550, L:600
FORK
Fox 36 Van RC2, 160mm travel, low/high speed compression and rebound adj. 20mm thru-axle, alloy tapered steerer
WHEELS
FRONT TIRE
Specialized Clutch SX 26x2.3"", SX casing, aramid bead, dual compound
REAR TIRE
Specialized Chunder SX 26x2.3"", SX casing, aramid bead, dual compound
INNER TUBES
Presta valve
RIMS
Custom DT Swiss F550, 30mm wide, 32h
FRONT HUB
Hi-Lo disc, 20mm thru-axle, 32h
REAR HUB
Thru axle 135mm, hollow 10mm Cr-Mo axle w/ RD guard
SPOKES
DT Swiss Competition 2.0/1.8/2.0mm stainless
DRIVETRAIN
FRONT DERAILLEUR
Shimano M660 SLX, DMD, top swing, dual pull
REAR DERAILLEUR
SRAM X-0, 9-speed, mid cage
SHIFT LEVERS
SRAM X-9 aluminum trigger
CASSETTE
Shimano HG61, 9-speed, 11-34t
CHAIN
SRAM PC-971, 9-speed w/Power Link
CRANKSET
FSA Gravity Lite MegaExo, forged hollow arms, 24A/36A rings with Gamut shift guide
BOTTOM BRACKET
FSA BB-7000 for Gravity Lite crank, 73mm shell
COCKPIT
STEM
Specialized, 35mm extension, OS 31.8, 4-bolt, forged
HANDLEBARS
Specialized Demo low-rise bar, 7050 alloy, 31.8mm, 750mm wide, 9 degree backsweep, 6 degree up
GRIPS
Specialized waffle lock on grip (S/M) Specialized Thick lock on grip (L) with alloy end plug
SADDLE
Specialized Enduro, 8mm hollow Cr-Mo rails, SL foam
SEATPOST
Thomson straight w/ 12 degree clamp, 367mm
BRAKES
FRONT BRAKE
Custom Avid Code CR Mag hydraulic disc, Mag CR lever with tooless reach and pad contact adj. Code caliper, stainless hardware, 203mm rotor
REAR BRAKE
Custom Avid Code CR Mag hydraulic disc, Mag CR lever with tooless reach and pad contact adj. Code caliper, stainless hardware, 185mm rotor
BRAKE LEVERS
Custom Avid Code CR Mag Hydraulic, tool-less reach and pad contact adj.
ACCESSORIES
PEDALS
Specialized Lo-Pro Mag
*Gewichte basieren auf der Produktion lackierter Rahmen, wie abgebildet. Tatsächliche Gewichte variieren je nach Farbgebung, Rahmengrösse und Komponentenvariation. Spezifikationen können ohne Vorankündigung geändert werden.
Geometrie
| S | M | L | |
|---|---|---|---|
| Mitte Tretlager - Mitte Vorderachse | 942mm | 942mm | 942mm |
| Tretlagerhöhe 650x2.8" | 356mm | 356mm | 356mm |
| Oberrohrlänge (horizontal) | 574mm | 592mm | 615mm |
| Steuerrohrhöhe | 120mm | 120mm | 120mm |
| Vorlauf | 66° | 66° | 66° |
| Radstand | 70.5° | 70.5° | 70.5° |
| Seat Tube Angle (Effective) - Low Setting | 74.5° | 74.5° | 74.5° |
| Oberrohrlänge tatsächlich | 546mm | 560mm | 577mm |
| Seat Tube Length - Center to Top | 394mm | 419mm | 470mm |
| Radstand | 1149mm | 1167mm | 1190mm |
| Überstandshöhe | 700mm | 699mm | 735mm |
| Stack | 586mm | 586mm | 586mm |
| Reach | 411mm | 429mm | 452mm |
| Kettenstreben-Länge | 419mm | 419mm | 419mm |
| Kurbellänge | 170mm | 170mm | 170mm |
| Lenkerbreite | 750mm | 750mm | 750mm |
| Vorbaulänge | 40mm | 40mm | 40mm |
| Länge Sattelstütze | 330mm | 330mm | 330mm |
Anleitungen herunterladen
Weitere Sicherheitshinweise finden sich in den entsprechenden Handbüchern im Downloadbereich auf dieser Seite.
Bewertungen anderer Rider
0 Bewertungen