2012 Stumpjumper Carbon 29 Singlespeed Frame

0 Reviews

A carbon fiber Stumpjumper 29 hardtail singlespeed frame ready for a custom buil…

Product Details

A carbon fiber Stumpjumper 29 hardtail singlespeed frame ready for a custom build.

FACT IS 8m carbon HT singlespeed frame has 29er geometry and is engineered with a tapered head tube, horizontal sliding dropouts, PF30 BB and PM 140 rear brake for a stiff, responsive and race-ready design
S-Works carbon single-bolt head 27.2mm seatpost is ultra-lightweight and adds compliance without sacrificing strength

Technical Specifications

FRAMESET

FRAME

FACT 8m carbon, 29"" geometry, FACT IS construction, tapered HT, carbon PF30 BB, PM 140 rear brake, sliding dropouts

HEADSET

1-1/8 threadless, Campy style upper with 1-1/2"" lower bearing for tapered integrated HT, cartridge bearings

SEAT BINDER

32.6mm clamp size, 7050 hard anodized alloy collar, single bolt

DRIVETRAIN

BOTTOM BRACKET

S-Works OS, integrated for PF30

COCKPIT

SEATPOST

S-Works Carbon, 27.2mm, single-bolt head, 15.5/17.5"": 350mm, Others: 400mm

* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.

Geometry

	15.5	17.5	19	21
Ground-Top	897mm	916mm	930mm	945mm
Top Tube Length (Horizontal)	570mm	592mm	615mm	640mm
Seat Tube Angle (Effective)	73.5°	73.5°	73.5°	73.5°
Head Tube Height	90mm	100mm	115mm	130mm
Top Tube Length (Actual)	558mm	570mm	590mm	614mm
Seat Tube Length - Center to Top	394mm	445mm	483mm	533mm
Bottom Bracket Drop	63.5mm	63.5mm	63.5mm	63.5mm
Bottom Bracket Height	304mm	304mm	304mm	304mm
Wheel Base	1049mm	1072mm	1106mm	1132mm
Standover Height	760mm	810mm	830mm	870mm
Stack	594mm	612mm	627mm	641mm
Reach	394mm	410.5mm	430mm	450mm
Head Tube Angle	71.5°	71.5°	71.5°	71.5°
Chainstay Length	435mm	435mm	435mm	435mm
Crank Length	170mm	175mm	175mm	175mm
Handlebar Width	680mm	680mm	680mm	680mm
Stem Length	75mm	90mm	105mm	105mm