Part No.: 8119-6121
0 Reviews
Start rolling right on a proper bike built for shredding with a strong Hi-Ten steel…
Color:
Black
Start rolling right on a proper bike built for shredding with a strong Hi-Ten steel frame and fork and quality components.
P. Series tapered fork is strong enough to handle abuse
Big 8" x 28" handlebars make your set-up current and give you more leverage and control
One-piece saddle/post combo can take a serious beating and is the lightest set-up possible
3-piece tubular Cr-Mo crankset with cartridge-bearing MID BB lets you boost as high as you like
Lightweight 36-hole wheels with low flange 3/8" axle front hub and rear 14mm cassette with 9t driver
High volume and impact-absorbing Specialized Rhythm Lite 2.2" tires give you the versatility to ride dirt or street
Lightweight plastic platform pedals take mercy on your shins, but remain strong enough to handle even the harshest landing
Hi Ten frame with 20.6" top tube has an integrated headset, MID BB, small dropouts, and dialed geos for dirt, park, or street
FRAME
Hi-Ten 20"" frame, 20.5"" TT, MID BB shell, externally relieved integrated HT, formed monostay yoke, seat-stay mounted U-brake bosses, 5mm dropouts for 14mm axle
FORK
Hi Ten, Taper blades, 1-1/8"" threadless, 5mm dropouts for 3/8"" axle
HEADSET
Integrated FSA Impact, 1-1/8"" threadless, Campy type cartridge bearings
SEAT BINDER
Cr-Mo seat pin, allen key type
REAR TIRE
Specialized Rhythm Lite Sport, 20 x 2.2"", 30TPI, wire bead
INNER TUBES
Schraeder valve
RIMS
Alex, alloy single wall, pinned, 36h
FRONT HUB
Forged alloy low flange, Cr-Mo 3/8"" axle, loose ball, 36h
REAR HUB
Forged alloy cassette, 14mm axle, loose ball, 36h, 9t driver
SPOKES
2mm (14g) stainless
FRONT TIRE
Specialized Rhythm Lite Sport, 20 x 2.2"", 30TPI, wire bead
FREEWHEEL
1/2"" x 1/8"" x 9t
CHAIN
KMC Z-510H, 1/2"" x 1/8"", anti-drop inner links
CRANKSET
3pc. tubular Cr-Mo for 8 spline, 170mm length
CHAINRINGS
Stamped steel, 25t
BOTTOM BRACKET
Mid BB, 2x sealed cartridge bearing w/ 19mm 8 spline Cr-Mo BB spindle, steel tube and plastic cone spacers
STEM
Forged alloy front load drop type, 50mm extension, 1 1/8"" A-Head
HANDLEBARS
Cr-Mo 2pc., 8"" x 28"", 11 degree back sweep, 2 degree up
GRIPS
P. Grip BMX soft compound, closed end, flanged, 150mm
SADDLE
P. Combo, 1pc co-molded composite saddle and alloy seat post combination
SEATPOST
Alloy, no offset, 25.4mm
REAR BRAKE
Tektro FX-340 U-brake, melt forged, single bushing, coil spring, 15mm offset arms, soft compound pads
BRAKE LEVERS
Lever ""U"" brake, 15mm cable pull
PEDALS
P. Lo-Pro plastic platform, loose ball, 9/16""
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
20.5 | |
---|---|
Top Tube Length (Horizontal) | 550mm |
Rake | 31mm |
Top Tube Length (Actual) | 522mm |
Seat Tube Length, Center to Top | 235mm |
Bottom Bracket Drop | -35.7mm |
Bottom Bracket Height | 294mm |
Wheel Base | 921mm |
Head Tube Length | 110mm |
Head Tube Angle | 75° |
Chainstay Length | 352mm |
Seat Tube Angle | 72° |
Seatpost Length | 0mm |
For safety warning please refer to the documentation in the Manual Downloads section of this page.
0 Reviews