0 Reviews
Smooth front suspension, better brakes, and double-walled 29
Smooth front suspension, better brakes, and double-walled 29
Light and durable double-walled 29" alloy rims are tough enough to handle the rough stuff
Avid BB5 mechanical disc brakes with 160mm G2 Clean Sweep rotors for controlled stopping power
Fully butted A1 Premium Aluminum 29er frame with double ORE down tube for a lighter, more compliant and durable bike
80mm smooth-travel 29" fork with preload adjustment, lockout, and size-specific spring rates for more versatility and tunability over varying terrain
Specialized 29" Fast Trak LK Sport 60tpi tires use a reduced knob height for lower rolling resistance, but have plenty of grip for confidence on the trail
SR Suntour crankset uses Shimano's Octalink-splined BB interface for increased power transfer along with cartridge bearings and replaceable rings for longevity
FRAME
Specialized A1 Premium Aluminum, Trail 29"" geometry, fully butted, formed TT, Double ORE DT, externally relieved HT, reinforced disc mount, forged dropouts w/ replaceable hanger, disc only
HEADSET
1-1/8"" threadless, loose ball
SEAT BINDER
Alloy QR, nylon washer
FORK
SR Suntour SF11-XCM-V3-29-DS-MLO, 80mm, 1pc. alloy lower, 30mm Hi-Ten stanchions, mechanical LO, coil/mcu spring w/ preload adj., spring assisted seals
RIMS
Alex RHD 29"", alloy double wall, pinned w/eyelets, 32h
FRONT HUB
Forged alloy, hi/low flange, double sealed, ground race, machined disc mount and flange, QR, 32h
REAR HUB
Forged alloy, mid flange, double sealed, ground race, machined disc mount and flanges, cassette, QR, 36h
SPOKES
2mm (14g) stainless
FRONT TIRE
Specialized Fast Trak LK Sport, 29x2.0"", 60TPI, wire bead
REAR TIRE
Specialized Fast Trak LK Sport, 29x2.0"", 60TPI, wire bead
INNER TUBES
Schraeder valve
FRONT DERAILLEUR
Shimano Altus, 34.9mm clamp
REAR DERAILLEUR
SRAM X.4 8sp Midcage
SHIFT LEVERS
SRAM X.4 8sp trigger
CASSETTE
SRAM PG-820, 8-speed, 11-32t
CHAIN
KMC X8 w/ reuseable Missing Link
CRANKSET
SR SunTour, Octalink spline
CHAINRINGS
42S x 32S x 22S replaceable
BOTTOM BRACKET
Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm
SEATPOST
Alloy two bolt, 12.5mm offset, micro adjust, 30.9mm
STEM
3D forged alloy, 4 bolt, 10 degree rise, 25.4mm clamp
HANDLEBARS
Alloy riserbar, 25mm rise, 8 degree back sweep, 6 degree up
GRIPS
Specialized Enduro, dual compound Kraton, no flange, 131mm
SADDLE
Specialized XC, Body Geometry, 143mm width, front and rear bumpers
FRONT BRAKE
Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor
REAR BRAKE
Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor
BRAKE LEVERS
Alloy, linear pull
PEDALS
Composite platform, toe clip compatible, 9/16"" w/ reflectors
* Weights based on production painted frames as pictured. Actual weights will vary based on colorway, frame size, and component variation. Specifications are subject to change without notice.
For safety warning please refer to the documentation in the Manual Downloads section of this page.
0 Reviews