2011 P. 20 Int
Part No.: 8119-5621
0 Reviews
Cr-Mo frame, fork and components roll on double-wall alloy 20" rims for a quick,…
Colour:
Black
Size:
One Size
Product Details
Cr-Mo frame, fork and components roll on double-wall alloy 20" rims for a quick, respsonsive, and virtually bombproof ripper of a bike.
P. Series butted and tapered Cr-Mo fork is light yet strong enough to handle heavy abuse
One-piece saddle/post combo can take a serious beating and is the lightest set-up possible
Big 8-1/4" x 29" Cr-Mo handlebars make your set-up current and give you more leverage and control
High volume and impact-absorbing Specialized Rhythm Lite 2.2" tires give you the versatility to ride dirt or street
Lightweight plastic platform pedals take mercy on your shins, but remain strong enough to handle even the harshest landing
3-piece tubular Cr-Mo crankset with cartridge-bearing MID BB lets you boost as high as you like, 25t CNC-cut chainring improves clearance, resists bending, and cuts weight
36-hole double-wall rims are laced to a cartridge-bearing, low flange 3/8" axle front hub and 14mm hollow axle cassette rear for the best balance of high strength and light weight
Lightweight butted Reynolds 520 Cr-Mo frame with 21" top tube, integrated headset, MID BB and 3D-forged dropouts with integrated tensioner and removable brake bosses/guides has dialed geos for dirt, park, or street
Technical Specifications
FRAMESET
FRAME
100% Cr-Mo. 20.75"" TT, MID BB shell, tig welded, formed DT/TT, externally relieved integrated HT w/ stamped ""S"" logo, wrap gusset BB yoke, seat-stay mounted U-brake bosses, integrated seat collar, 6mm dropouts for 14mm axle
FORK
Taper Cr-Mo blades, 1-1/8"" threadless, 5mm dropouts for 3/8"" axle
HEADSET
FSA Impact, 1-1/8"" threadless, integrated
SEAT BINDER
Cr-Mo seat pin, allen key type
WHEELS
SPOKES
2mm (14g) stainless
FRONT TIRE
Specialized Rhythm Lite Sport, 20 x 2.1"", 30TPI, wire bead
REAR TIRE
Specialized Rhythm Lite Sport, 20 x 2.1"", 30TPI, wire bead
INNER TUBES
Schraeder valve
RIMS
Fuse Double, double wall w/ eyelets
FRONT HUB
P. Lo-Pro low flange, Cr-Mo 3/8"" axle, cartridge bearings, 36h
REAR HUB
P. Lo-Pro cassette, forged alloy single speed cassette, hollow 14mm axle, cartridge bearings, 36h, 9t driver
DRIVETRAIN
FREEWHEEL
Odyssey 1/2"" x 1/8"" x 13t for M30 thread
CHAIN
KMC Z-510H, 1/2"" x 1/8"", anti-drop inner links
CRANKSET
P. 3pc tubulars, Cr-Mo for 8 spline, 175mm length
CHAINRINGS
CNC cut 6061 28t w/ Motostar design
BOTTOM BRACKET
Mid BB, 2x sealed cartridge bearing w/ 19mm 8 spline Cr-Mo BB spindle, alloy tube and cone spacers
COCKPIT
HANDLEBARS
Cr-Mo 2pc., 8-1/4"" x 29"", 11 degree back sweep, 2 degree up
SADDLE
P. Combo, 1pc co-molded composite saddle and alloy seat post combination
SEATPOST
Alloy, no offset, 25.4mm
STEM
Fuse forged alloy, 50mm extension, 1 1/8"" A-Head
GRIPS
Fuse File, Kraton w/ flange
BRAKES
REAR BRAKE
Tektro FX-15, cold forged, double bushing, linear spring, 15mm offset arms, soft compound pads
BRAKE LEVERS
Tektro 275A, cold forged two finger lever, 15mm cable pull
ACCESSORIES
PEDALS
P. Lo-Pro plastic platform, loose ball, 9/16""
* Weights based on production painted frames as pictured. Actual weights will vary based on colourway, frame size, and component variation. Specifications are subject to change without notice.
Geometry
| 21 | |
|---|---|
| Top Tube Length (Horizontal) | 564in |
| Rake | 31in |
| Top Tube Length (Actual) | 535.7in |
| Seat Tube Length, Centre to Top | 235in |
| Bottom Bracket Drop | -35.7in |
| Bottom Bracket Height | 294in |
| Wheel Base | 938in |
| Head Tube Length | 110in |
| Head Tube Angle | 75in |
| Chainstay Length | 352in |
| Seat Tube Angle | 72in |
| Seatpost Length | 0in |
Manual Downloads
For safety warning please refer to the documentation in the Manual Downloads section of this page.
Rider Reviews
0 Reviews